The SHURE KSM141-SL is a condenser microphone with a configurable cardioid or omnidirectional pattern. Designed for studio applications, thanks to its robustness it can also be used on stage, thanks also to the high SPL supported. It has an attenuator (-0 dB, -15 dB and -25 dB) and a configurable high pass filter.
Electret capacitor
Frequency response: 20 to 20,000 Hz
Output Impedance: 150 ohms (effective)
Phantom power requirements: 48 Vdc, 4.7 mA
Common mode rejection:> 50 dB, 50 Hz to 20 kHz
Polarity: Positive pressure on the front diaphragm produces a positive voltage on output pin 2 with respect to pin 3
Polar models: Cardioid, Omnidirectional
Sensitivity (typical; at 1000 Hz; 1 Pa = 94 dB SPL): -37 dBV / Pa
Self-noise (typical, equivalent SPL; A-weighted, IEC 651): 14 dB
Maximum SPL at 1000 Hz: 5000 ohm load 134 dB (159 dB, pad -25); 2500 ohm load 139 dB (164 dB, pad -25); 1000 ohm load 134 dB (159 dB, pad -25)
Output Clipping Level: 5000 ohm load 15 dBV; 2500 ohm load 9 dBV; 1000 ohm 3 dBV load
Dynamic range: 5000 ohm 131dB load; 2500 ohm load 125dB; 1000 ohm load 120dB
Signal to Noise Ratio: 80dB
Switch Attenuator: 0, −15, −25 dB
Low frequency response: flat; -6 dB / octave below 115 Hz; -18 dB / octave below 80 Hz
Need advice or have a question about this product? Contact us!
Why buy from Esse Music Store?
Assistance
A pre and post sales support at your complete disposal. If there's a problem, you're sure we'll solve it.
Payment
You can pay your order as you like, choose between PayPal, Scalapay, Klarna, credit card or bank transfer.
Shipping
We ship to most EU countries by express courier and delivery within 48/36h. All shipments are fully insured.
Safety
Two-year warranty on all new products and three months on used ones. And if you do not like what you bought online you have 14 days to return it.
Terms and conditions
Contacts
Store hours
Luthier's hours
Let's keep in touch