Specifications
Type: Phase Coherent Cardioid.
Element: Electret condenser.
Frequency response (typical): 50 Hz to 18,000 Hz at 30 degrees incidence to surface. See Fig. 1.
Polar pattern: Half-supercardioid (supercardioid in the hemisphere above the primary boundary).
See Fig. 2 and Fig. 3.
Impedance: 150 ohms nominal (85 ohms actual), balanced. (Recommended load impedance 1000 ohms or greater.)
Open-circuit sensitivity: 22mV/Pa* (–33 dB re 1 V/Pa*).
Power sensitivity: –31 dB re 1 milliwatt/Pa*/–123 dBm EIA.
Equivalent noise level (self noise): 22 dB typicaL (0 dB = .0002 dyne/cm2), A-weighted.
S/N ratio: 72 dB at 94 dB SPL.
Maximum SPL for 3% THD: 120 dB SPL.
Polarity: Positive pressure on the diaphragm pro- duces positive voltage on pin 2 with respect to pin 3 of output connector.
Cable: 15-foot, black, two-conductor shielded cable with Switchcraft TA3F connector and A3M con- nector.
Operating voltage: Standard phantom power: 12 to 48 volts DC positive on pins 2 and 3 with respect to pin 1.
Safe Operating Temperature: –10° to +50° C or +14° to +122° F.
Current drain: 4 mA nominal.
Materials: All steel body construction. Finish: PCC-160: black. PCC-160W: off-white. Net weight: 11.5 oz. (326 g).
Dimensions: See Fig. 5.
Optional accessories: Crown PH-1A phantom