Newton Channel is a modern and powerful channel strip, with a long sonic tradition. Its intuitive design offers a classic, recognizable sound, plus the ability to shape the sound with signature Rupert Neve Designs features.
Newton Channel is suitable for recording studios of various sizes and can be used both in the studio and live, allowing more industry professionals to experience the quality of RND products.

Front Panel Features:

-Mic Gain: 12-step rotary switch that controls the gain of the microphone pre in 6 dB steps. For line level input signals, set the microphone gain to the "0dB" position.
-48V: Switch that lights RED when +48V Phantom Power is active.
-Ø (Polarity): Push-button switch that lights up amber when inserted and inverts the polarity of the preamp signal.
-HPF: Switch that lights up GREEN when the high pass filter is engaged.
-FREQ: 31-step potentiometer that allows the user to adjust the cutoff frequency of the high pass filter in a range from 20Hz to 250Hz.
-EQ IN: Switch that lights up GREEN when the EQ section is activated.
-TRIM: 31-step potentiometer that allows the user to adjust the preamp gain by +/- 6 dB.
-LF: 31-step potentiometer that controls the amount of boost or cut of the low frequency shelf over a range of +/- 12dB.
-60/150: Switch that selects between the two available low frequency shelves: 60Hz (OUT) and 150Hz (IN).
-MID FREQ: 31-step potentiometer that controls the frequency of the midband peaking EQ in a range between 220 Hz and 7 kHz.
-MID: 31-step potentiometer that controls the amount of boost or cut for the MID FREQ peaking EQ over a range of +/- 12 dB.
-8K/16K: Switch that selects between the two available high frequency shelves: 8kHz (OUT) and 16kHz (IN).
-HF: 31-step potentiometer that controls the amount of boost or cut for the high frequency shelf over a range of +/- 12 dB.
-COMP IN: Switch that lights up GREEN when the compressor section is engaged.
-RELEASE: 31 step potentiometer that controls the release time of the compressor. The overall available timing range is from 50mS (FAST) to 500mS (SLOW).
-THRESHOLD: 31-step potentiometer that controls the compressor threshold from +20dBu to -30dBu. When the input signal exceeds the set threshold level, compression begins
a soft-knee with a 2:1 ratio.
-GAIN: 31-step potentiometer that controls the make-up gain of the compressor in a range from -6dB to +20dB.
-PRE EQ: Push button switch which, when active, directs the compression section before the EQ section.
-SILK: Illuminated button switch that alternates the three available SILK modes: OFF, RED and BLUE.
-TEXTURE: 31-step potentiometer that controls the amount of SILK harmonics added to the transformer output stage when SILK mode is activated.
-GR and OUT Metering: 8-segment LED meter indicating compressor gain reduction (dB) and output level (dBu).
-POWER: LED that lights up GREEN when the Newton Channel is turned on.