Complete Kit of Microphones for Drums

sE Electronics presents the new sE V Packs for drums, bundles complete with mic, flight case and accessories. At the beginning of 2019 sE Electronics had introduced the V Series for drums, with the V Kick, V Beat microphones and the V Clamp accessories. Since their introduction to the market, these transducers have already been used on the stages of prestigious artists such as Justin Timberlake, John Mayer and many others. Two special bundles are now available that include these same microphones with a practical dedicated case: the V Packs. At the moment they are available in two versions: V Pack Arena and V Pack Club. The V Pack Club is designed for more essential miking to a more affordable price, while the V Pack Arena is the best and most complete kit. The V Pack Arena contains a V Kick microphone for the kick drum, three V Beat and V Clamp for the toms, a V7 X for the snare drum and a pair of sE8 condenser microphones for the overheads. It currently represents the sE Electronics top-of-the-range drum bundle. The robust and compact plastic flight case then includes all the various clips, nuts and adapters.
Features V Kick (kick)
Capsule: Dynamic
Coil: Aluminum
Magnet: Neodymium
Polar diagram: Supercardioid
Frequency range: 20Hz - 19kHz
Impedance: 300Ohm
Sensitivity: 0.2 / 0.4mV / Pa (-69 / -75dBV)
Connectivity: 3-pin XLR M
Dimensions: H60 x 135mm
Weight: 0.468kg
V Beat features (3x toms)
Capsule: Dynamic
Coil: Aluminum
Magnet: Neodymium
Polar Diagranna: Supercardioid
Frequency range: 30Hz - 19kHz
Impedance: 300 Ohm
Sensitivity: 2.0mV / Pa (-54dBV)
Connectivity: XLR M 3-pin
Dimensions: 61mm x 110mm
Weight: 0.347g
V7X (snare) features
Capsule: Dynamic
Coil: Aluminum
Magnet: Neodymium
Directional model: Supercardioid
Frequency range: 30Hz - 19kHz
Impedance: 300 Ohm
Sensitivity: 2.0mV / Pa (-54dB)
Connectivity: XLR 3-pin male
Diameter: 47mm
Length: 176mm
Weight: 269g
Included accessories: Microphone clip, adapter, internal windscreen, carrying case
Features sE8 (2x overhead)
Capsule: 0.5 "handcrafted condenser
Polar diagram: Cardioid
Frequency range: 20Hz - 20kHz
Sensitivity: 25mV / Pa (-32dBV)
SPL (0.5% THD) max: 139/149/159 dBSPL (0/10/20 dB Attenuation pad)
Equivalent Noise Level: 13 dB (A)
Dynamic range: 126/136/146 dB (0/10/20 dB Attenuation pad)
Signal to noise ratio: 81dB
Low cut filter: 80 / 160Hz, 6dB / Oct, selectable
Attenuation pad: 10 / 20dB, selectable
Power supply: 48 Volt according to IEC 61938
Impedance: 110 Ohm
Recommended impedance load:> 1k Ohm
Current consumption: 2.7mA
Connection: 3-pin XLR male connector
Dimensions: D23 x 120mm
Weight: 141g
V Clamp features (3x clamps)
Includes microphone clips and threaded adapters
Dimensions: H75 x 57mm
Weight: 93g